Manual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea

Manual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea

Introduction:
The model 501K is a  Manual Engine Control Module, which is designed to manually control the  engine via a key
switch on the front panel. The module is used to start and stop engine,  indicating fault conditions, automatically s
hutting down engine and indicating engine failure by LED giving true first  up fault annunciation.

Features:
Oil  Pressure Monitoring
Engine Temperature Monitoring
Overspeed Protection
Charge Failure Warning
　
DC Supply:9 to 33 V Continuous.   
Cranking Dropouts:Able to survive voltage dips during cranking.   This is achieved without the need
for internal batteries.   
Alternator Input Range:15 - 305 V AC RMS
Alternator Input Frequency:50 - 60 Hz at rated engine speed.   
Magnetic Input Range:0. 5 V to +/- 80 V  
Magnetic Input Frequency:2300Hz to 6000 Hz at rated engine speed.   
Start Relay Output:16 Amp DC at supply voltage.   
Run Relay Output:16 Amp DC at supply voltage.   
Alarm Output:1 Amp DC at supply voltage.   
Dimensions:72 X 72 X 118. 5 (Excluding Key-switch)   
Operating Temperature Range:-30 to +70°C  
Installation:
Front panel mounting via suitable cut-out.
Retaining clips supplied.
Cable connections via locking plug and socket type connectors.  
Calibration:Speed trip setting and meter calibration adjustment potentiometer are accessible
from the rear of the module