Equipment like excavators, tractors, cars, or other engine-powered machines rely on ignition switches, so when the ignition switches go wrong, operators may face several issues. The key not turning, the engine failing to start, accessories not powering on, or the dashboard lights flashing unexpectedly are common signs to suggest a faulty ignition switch. It raises the question: How much does it cost to replace an ignition switch? Generally speaking, the cost ranges from $50 to 400, depending on the type of machine and whether you opt for professional service or a DIY approach. FridayParts recommends that you replace the ignition switch yourself with the right guidance and tools. In this article, we will provide a comprehensive guide that covers how to identify ignition problems, step-by-step replacement instructions, and a cost breakdown — everything you need to know about ignition replacement.
How Do I Know If My Ignition Is Bad?
When an ignition switch goes wrong, there are often some signs to showcase the problem. Here are some common keys to watch for:
- Key won’t turn: This is one of the most superficial causes. If the key is stuck or you can’t turn the ignition switch, it could be a sign of worn internal components or a misaligned ignition switch.
- Engine won’t start: The ignition switch is there for starting an engine, so if there is nothing wrong with your engine, take the ignition to blame. By the way, this problem is often confused with a battery issue, but if the battery is in good condition, the switch should be checked.
- Accessory won’t turn on: Efficient use of the dashboard is a good way to check the operation of the machine. If the radio, air conditioning, or dashboard lights don’t activate when the key is turned to the “accessory “position, the ignition switch may be malfunctioning.
- Instrument panel light blinks: Same as I mentioned before if the instrument panel warning light blinks or flashes unexpectedly, the switch may be short-circuited or not maintain a stable connection.
One isolated of the above problems may be a coincidence, but if you notice more of these symptoms, consider having the ignition switch inspected to determine if it needs to be repaired or replaced.
How Much Does It Cost to Replace an Ignition?
The cost to replace an ignition switch depends on the type of vehicle or machine, labor fees, and the price of parts. Here’s a breakdown of potential expenses:
- DIY replacement: If you handle the installation yourself, you’ll only pay for the part, which ranges from $50 to $150.
- Professional replacement: Hiring a mechanic can increase the total cost from $200 to $400 due to labor fees and additional services.
Choosing the DIY option can significantly reduce your ignition replacement cost. In need of a quality ignition switch? Come visit FridayParts.com. We only offer ignitions that meet OEM standards and you can find parts compatible with various brands and equipment types here, all come with fair prices. Also, I believe that with our careful guidance, I am pretty sure it won’t be as difficult as you may think!
Can I Replace the Ignition Switch Myself?
The answer is definitely a yes. With patience and the right tools, you can replace an ignition switch yourself! Here is a step-by-step guide to walk you through the process:
- Turn off the engine and disconnect the battery: Safety first always comes first. Disconnect the negative battery terminal to avoid electrical accidents.
- Remove the steering column cover: Use a screwdriver to remove the screws holding the cover in place, then slide it off to expose the ignition switch.
- Locate the ignition switch: Identify the ignition switch assembly, which is usually near the key slot or ignition lock cylinder.
- Disconnect the wiring: Carefully detach the wiring connectors attached to the switch. Take a picture or label the connectors to ensure correct reassembly.
- Remove the old ignition switch: Use a screwdriver or socket wrench to unscrew and remove the ignition switch from its housing.
- Install the new ignition switch: Position the new switch in place and secure it with screws. Reconnect the wiring using the labels or reference photo.
- Reattach the steering column cover: Secure the cover back into place with the screws you removed earlier.
- Reconnect the battery: Reattach the negative battery terminal and test the new ignition switch to ensure it works properly.
Buy Ignition Switch at FridayParts
This guide has walked you through everything from identifying ignition issues to step-by-step replacement instructions and cost estimates. Now, it’s time to take action. Looking for a cost-effective way to replace your ignition switch? You’ve come to the right place. At FridayParts, we make it easy to find and purchase the ignition switch you need.
Don’t let ignition issues keep you sidelined. Visit FridayParts today to find the perfect ignition switch for your equipment. Shop Now and enjoy peace of mind with every purchase.
