1.5HP Deep Well Submersible Pump 115V/60Hz, 4 Inch Stainless Steel, External Controller, 33ft Cord, 37GPM Flow 308ft Head, IP68 Waterproof for Industrial, Irrigation, Home Use

1.5HP Deep Well Submersible Pump 115V/60Hz, 4 Inch Stainless Steel, External Controller, 33ft Cord, 37GPM Flow 308ft Head, IP68 Waterproof for Industrial, Irrigation, Home Use

Specifications:
Pump Diameter: 4 inch
Controller Type: External Control Box
Rated Voltage: 115V / 60Hz
Rated Output Power: 1.125 kW (1.5 HP)
Motor Type: Copper Motor
Insulation Class: F-Class
Stator Stack Height: 92–150 mm
Overheat Protection: Built-in Thermal Protection
Cable Core Diameter: 2 mm
Power Cable Length: 33 ft (10 m)
Maximum Flow Rate: 140 L/min (37 GPM)
Maximum Head (Rated): 83 m (272 ft)
Maximum Head (Test / Quoted): 94 m (308 ft)
Impeller Type: 9-Stage Thermoplastic Impellers
Discharge Size: 1-1/4" NPT
Discharge Material: Stainless Steel
Main Housing Material: Stainless Steel
Surface Finish & Color: Natural Stainless Steel
Major External Components: Stainless Steel (Original Finish, No Coating)
Pump Waterproof Rating: IP68
External Controller Protection: IP44
Inlet Filtration: Stainless Steel Filter Mesh
Check Valve: Built-in Anti-Backflow Check Valve
Minimum Well Casing Size: 4 inch or larger
Operating Condition: Fully Submerged
Dry-Run Protection: Not allowed (Do not operate without water)

Application:
Fit For Industrial, Irrigation, Home Use

Package Content:
1x Submersible Pump
1x External Controller
1x Insulation Tape
1x User Manual